MOMOI MONO OUTRIGGER LINE – 400LB
September 10, 2014
Z WING
September 10, 2014

HAL LOCK LOCKING OUTRIGGER PULLEY

$29.99$74.99

Available for Single, Double or Triple Rigging.

HAL LOCK LOCKING OUTRIGGER PULLEYS, Eliminates the need to tie the outrigger halyards together with rubber bands or wire, or using a sliding swivel arrangement. While these methods may temporarily solve the problem, they are time consuming and unsafe. I think most would agree that reaching out over the side of the boat with both hands tying halyards together is not the safest place to be in rough seas.   And, there are more important things to do than waste time tying and untying halyards together.

 The HAL-LOCK Outrigger Pulleys were specially designed for speed and efficiency.  Simply pull the locking lever back and the halyard is pushed into the softer urethane insert locking the halyard in place. That Easy! That Fast!, and because of HAL-LOCK’s unique ability to lock, very little tension is required on the shock cord, allowing you to get your clip up and back down with less effort.

 Halyard material used with HAL-LOCK should be .005 inch mono, 2.0mm mono or 3/32-1/8 inch braided cord.

We recommend using 2.0mm outrigger mono.

Model

Single Outrigger Pully, Double Outrigger Pully, Triple Outrigger Pully